Security Safety Window Film (SEC 058)

Technical Features of SEC 058 Safety & Security Window Film

1. Base material: PET polyester
2. Total film thickness: 200 microns
3. Product width & length: 1.52 m – 1.83 m × 30 m
4. Adhesive type: acrylic polymer, approx. 25 g/m²
5. Liner (installation protector): silicone-coated PET, 23 microns
6. Color: colorless (clear)
7. Application side: interior (inside the building)
8. Breaking load: approx. 17.5 daN/cm
9. Elongation at break: 100%
10. UV-A transmission: approx. 5% (meaning 95% blocked)
11. Minimum installation temperature: +5°C
12. Fire rating: Euroclasses – B-s1, d0
13. Safety test standards: NF P78.406 and NF EN 12600
14. Service life / durability: 10 years (for interior installation)

How should safety window film be cleaned?

This glass surface is equipped with a safety protection window film.
Please observe the following when cleaning:

• Do not use alcohol-based cleaners (glass cleaners).
• For washing, use only water with diluted mild soap.
•  Avoid scratching the glass surface or using sharp objects.

Additional notes – 200 micron film

SEC 058 safety & security glass film is suitable for public locations such as retail stores, shopping centers, schools, hospitals, exhibition halls, sports facilities, and homes with window surfaces smaller than 3 m².

SEC 058 uses a special acrylic adhesive that absorbs impact energy or blast pressure, significantly reducing glass breakage risk. This is confirmed by tests under NF P78.406 and NF EN 12600 standards.

Even under flame or fire exposure, due to compliance with Euroclasses (B-s1, d0), this film may burn but does not intensify flame spread, maintaining its structural behavior.

SEC 058 safety film performs exceptionally without reducing glass transparency, since its crystal polyester material allows full clarity and light transmission. In addition, its adhesive filters approx. 95% of UV-A rays, helping prevent color fading of interior furnishings.